New drive belt, roller weights, spark plug.
After planning this work at 7500 miles I finally forced myself to do it at 8200. A friend commented that I did this for fun right? Fun? I can’t remember the last time I had fun with a wrench in my hand but I bet it was in the 1960’s. The only other reason would be to save money. It certainly saves on out-of-pocket expenses but once I factor in the time it takes any savings seems dubious. I’m not good but I am slow.
So why maintain the Vespa myself?
I’ve asked this question more than once lying on the cold concrete floor of our unheated garage trying to position my bifocals so I could see or each time I didn’t have the right tool or part. Why do this work when it would be easy to schedule our local Vespa technicians?
I had to revisit Zen and the Art of Motorcycle Maintenance by Robert Pirsig to find a more eloquent way to express the reasons I’ve engaged maintenance of the scooter. Chapter 2 is a great chapter wrestling with the idea of doing your own work. Pirsig writes:
“Here is the machine, isolated in time and in space from everything else in the universe. It has no relationship to you, you have no relationship to it…”
Pirsig rejects this notion and outlines the contemporary relationship most have towards their vehicles. A motorcycle or scooter is personal in a way a car can’t be. Perhaps it is the inherent risk in riding, the physical exposure or vulnerability or the heightened awareness of the world that makes the machine more connected to me. I entrust my life to my scooter in a real sense and having a basic understanding of the basic mechanical functioning and maintenance seems a reasonable step to ensure a successful relationship. For me, I believe performing routine checks and maintenance of the Vespa keeps me honest, it keeps me paying attention, and it keeps me safe. And it makes riding richer. It makes sense to me in my head. Time will tell if it works in practice.
I’m no mechanic either but I don’t want to feel helpless on the road should something happen. And I want to be able to repair failures myself on long trips that otherwise would spell the end of an adventure. Tires, drivebelt, ignition, cables, brakes, things that wear out or break. With the right parts and cooperation of a service station I could keep the Vespa on the road. The mechanical adventure. Not for everyone but I merely suggest you consider it. When I started this work I figured the worse that could happen is I would have to haul a half torn apart Vespa to the dealer to save me. A lesson in humility.
I’d like to say I enjoy this work but right now it is a challenge. Many years of greasy work under rusty old cars that I could not afford to have professionally repaired has soured my sense of mechanical adventure. But I won’t let this stand in the way. The Vespa is a simple machine and almost any repair is within my ability with a bit of support or research. I purchased the Haynes manual for my Vespa and I also downloaded the Piaggio service manual and parts manual and had them printed and bound at Kinkos complete with waterproof covers that I can clean after using them.
The Modern Vespa forum is an extremely helpful place. More than once I’ve gotten stuck somewhere in the process, posted my question, waited ten minutes, got the answer, and went on my way. It’s like having a mechanic on call! Check out this POST on changing roller weights. Towards the end you can see my frustrated self appear begging for help. And you can download all the service manuals HERE. I can’t say enough about everyone who is part of that forum. Gary, the Technical Moderator (aka addicted), not only has extensive experience but he also provides therapy for the fearful as he lately did with me! It’s worth joining if only to make it easier to follow the posting or do research on your Vespa or Piaggio dreams.
I did take the scooter out for a short test run and all is well. Stopped by this big willow tree to make a picture.
Lucky says
Way to go!
Another reason for doing your own work: Why trust someone else to do a good job? If they botch it, you could get hurt.
It’s frustrating that most new bikes (particularly FI bikes) are increasingly difficult or impossible to work on in your own garage.
Bill Sommers says
Back when I was playing rock-n-roll in the good old days, our guitar player would always sleep with his axe in the motel room. He would say that it was part of being “one with your instument”.
Not to suggest that you tuck in next to the Vespa, I agree that becoming intimate with your scooter makes sense to me.
Zen and the Art of Sleeping with a Telecaster.
Bill
gary says
I’ll tell you one thing that made working on my bikes more enjoyable: a bike lift. Bringing the work up to your level, instead of going into contortions on a cold, concrete floor, makes all the difference in the world.
If your Vespa can be lifted from the center, between the wheels, then there are lifts out there that can be had for less than fifty bucks. It was the best bike maintenance money I ever spent.
As for the Zen aspect, I suspect that applies more to patience and clear thinking more than anything else. One rule I have adopted over the years that helps a lot is: Never attempt to do complex scheduled maintenance on a tight schedule, i.e. just before a big ride or rally. Inevitably, you will end up breaking or losing some critical component because you were trying to hurry the job.
Take the ride, and THEN do the maintenance. Schedule triple the time you think it is going to take, so you aren’t under any pressure, and then just relax and take it step-by-step.
Ride well,
=gc=
EdMack says
Steve,
I’m the guy that lives on Plainfield Rd. where you were taking pictures this morning.
I knew we had Vespas in common, but after reading your post, its more than that. I’ve always felt EXACTLY the same way about the years of fixing cars under awful conditions when I was broke and under pressure. And the Vespa really is different.gb
Anonymous says
I have worked on my motorcycles most of my life doing routine maintenance, but part of my plan to enjoy middle age is to have a house cleaner and to ride the Vespa to the dealer for anything more than an oil change.The beuty of the simplicity is that the work can be scheduled and I can have lunch before sauntering back, paying and riding the GTS home. Another kind of zen…Of course with only 2,000 miles on the clock I have yet to really test this theory!
Michael
Key West
Combatscoot says
I’ll tell you another reason to do your own work: Modern dealers care more about quick work than they do about good work. That’s one reason why I don’t work as a professional mechanic anymore.
Good that you got the job done right. Did you have an impact wrench?
I still turn wrenches, but on my time, not a dealer’s. I charge about half what a dealer would, and get paid twice what I would-have. It’s only a job here-and-there, but my customer base is growing as scootering friends who cannot or won’t maintain their own machines have me do the work, are happy with the experience, and tell others.
John